firmware

Mirai Technologies

for perfect CD creation first time, every time!

Firmware Upgrades for MIRAI CD-RW Drives

Mirai provide the latest Flash Up Tool and Firmware for our CD-RW Drives as follows: (Please note that if you would like to renew the firmware, it is done at your own risk).

Please check the model name of your drive and choose the right firmware for it. Please pay attention in choosing the correct firmware, otherwise your drive may malfunction. Mirai do not accept liability for any damage or loss of data.

Firmware Upgrade for CRD-BP1500P-M

Flash Up Tool	Firmware
FlashTool261e.exe Procedure for Flashtool	Bp15_638.bin (256KB) ·Fix for formatting CD-RW media using InCD Software

Firmware Upgrade for CRD-BP4-M

Flash Up Tool	Firmware
FlashTool243.exe Procedure for Flashtool	Bp4_431.bin (256KB) ·DAO/RAW write/read has been supported ·Improvement of CD-G playback ability ·FUJI FILM and HITACHI MAXELL CD-R Disc has been supported

Firmware Upgrade for CRD-BP1400P-M

Flash Up Tool	Firmware
FlashTool243.exe Procedure for Flashtool	Bp14_532.bin (256KB) ·DAO/RAW write/read has been supported 90 minutes media support and Over Burn Improvement of CD-G playback ability

Firmware Upgrade for CRD-BP1300P-M

Flash Up Tool	Firmware
FlashTool243.exe Procedure for Flashtool	Bp13_106.bin (256KB) This f/w upgrade will allow to write in RAW DAO (Read After Write Disk At Once) and RAW SAO+SUB (Read After Write Session At Once and Sub Channel Data) Enable to read Sub channel data from Audio and Data tracks (essential for copying CD+g disks and copy protected games (Back-up Only)).

Firmware Upgrade for CRD-BP3-M

Flash Up Tool	Firmware
FlashTool243.exe Procedure for Flashtool	B3_106w.bin (256KB) This f/w upgrade will allow to write in RAW DAO (Read After Write Disk At Once) and RAW SAO+SUB (Read After Write Session At Once and Sub Channel Data) Enable to read Sub channel data from Audio and Data tracks (essential for copying CD+g disks and copy protected games (Back-up Only)).

Firmware Upgrade for CRD-BP2-M

Flash Up Tool	Firmware
WinFlash228.exe (292KB) Flash procedure by WinFlash FlashTool243.exe Procedure for Flashtool	Bp2_227.exe (127KB) For 90 minutes media support and Over Burn Bp2_221.exe (124KB) Bp2_217.exe (122KB)

System requirements

Host PC : IBM compatible PC (Pentium MMX-166MHz or more) Memory : 32MB required (64MB recommended) Operating System: Windows95, OSR2, Windows98, Windows98 SE

SCSI : Adaptec SCSI Host Adaptor AHA-2940xx (recommended) ASPI : Adaptec ASPI Manager Software

This software shall be used on your own responsibility. MIRAI shall not be liable for any indirect, special, incidental or consequential damage or loss (including damages for loss of business, loss of profits or the like), whether based on breach of contract, tort (including negligence), product liability or otherwise, even if MIRAI or its representatives have been advised of the possibility of such damages.